The Complete Guide To Porter-cable Pceg011: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Porter-Cable PCEG011 Information

The Porter-Cable PCEG011 is a 6-amp, 4.5-inch angle grinder that is designed for a variety of applications, including grinding, cutting, and polishing. It features a durable cast metal gearcase and a 3-position side handle for improved comfort and control. The grinder also has a tool-free guard change system for quick and easy access to the disc.

Image of Porter-Cable PCEG011 angle grinder

Here are the full specifications of the Porter-Cable PCEG011:

FeatureSpecification
Motor6.0 amps
Speed12,000 RPM
Disc size4.5 inches
Guard typeRemovable
Handle3-position side handle
Weight4.2 pounds

Features

  • Durable cast metal gearcase for jobsite durability
  • 3-position side handle for improved comfort and control
  • Tool-free guard change system for quick and easy access to the disc
  • No-volt switch to help prevent accidental restarts
  • Backed by a Porter-Cable 3-year limited warranty

What's in the box

  • Porter-Cable PCEG011 angle grinder
  • 4.5-inch grinding disc
  • Wrench
  • Owner's manual

The Porter-Cable PCEG011 is a versatile and powerful angle grinder that is perfect for a variety of tasks. It is durable, easy to use, and backed by a generous warranty. If you are looking for an angle grinder that can handle a variety of jobs, the Porter-Cable PCEG011 is a great option.

Here are some additional details about the features of the Porter-Cable PCEG011:

  • The cast metal gearcase is designed to withstand the rigors of jobsite use. It is also water-resistant, so you can use the grinder in wet or dusty conditions.
  • The 3-position side handle allows you to customize the grip for your comfort and control. You can also rotate the handle to 90 degrees, which is helpful for grinding in tight spaces.
  • The tool-free guard change system makes it easy to remove and replace the grinding disc. This is a safety feature, as it prevents you from having to touch the disc while it is spinning.
  • The no-volt switch helps to prevent accidental restarts. This is a safety feature that is especially important when using the grinder in a dusty environment.
  • The Porter-Cable PCEG011 is backed by a 3-year limited warranty. This gives you peace of mind knowing that your grinder is covered if it breaks or malfunctions.

Porter-Cable PCEG011 Compare with Similar Item

a table comparing the Porter-Cable PCEG011 to some similar items:

FeaturePorter-Cable PCEG011DeWalt DWE4110Makita GA4530Milwaukee 4933471063
Motor6 amps6 amps6.25 amps6.5 amps
Wheel size4.5 inches4.5 inches4.5 inches4.5 inches
RPM12,00011,00011,50012,000
FeaturesSoft start, tool-free guard change, no-volt switchSoft start, tool-free guard change, electric brakeSoft start, tool-free guard change, electric brakeSoft start, tool-free guard change, electric brake
Price$30$35$40$45

As you can see, the Porter-Cable PCEG011 is the most affordable option, but it does not have some of the features of the more expensive models, such as an electric brake. The DeWalt DWE4110 is a good mid-range option, and it has a soft start and tool-free guard change. The Makita GA4530 and Milwaukee 4933471063 are both high-end models, and they have all the features you could want, including an electric brake.

Ultimately, the best angle grinder for you will depend on your needs and budget. If you are looking for an affordable option that will get the job done, the Porter-Cable PCEG011 is a good choice. If you are willing to spend a little more money, the DeWalt DWE4110 or Makita GA4530 are both great options. And if you need the best of the best, the Milwaukee 4933471063 is the way to go.

Here are some additional details about each of the models:

  • Porter-Cable PCEG011: This model has a 6 amp motor and a 4.5 inch wheel. It has a soft start, tool-free guard change, and no-volt switch. It is backed by a 3 year warranty.
  • DeWalt DWE4110: This model has a 6 amp motor and a 4.5 inch wheel. It has a soft start, tool-free guard change, and electric brake. It is backed by a 3 year warranty.
  • Makita GA4530: This model has a 6.25 amp motor and a 4.5 inch wheel. It has a soft start, tool-free guard change, and electric brake. It is backed by a 3 year warranty.
  • Milwaukee 4933471063: This model has a 6.5 amp motor and a 4.5 inch wheel. It has a soft start, tool-free guard change, electric brake, and vibration reduction. It is backed by a 5 year warranty.

Porter-Cable PCEG011 Pros/Cons and My Thought

The Porter-Cable PCEG011 is a 6-amp angle grinder that is designed for light-duty to medium-duty grinding applications. It has a 4.5-inch disc and features a variable speed trigger, a durable construction, and a comfortable grip.

Pros:

  • 6-amp motor: Provides enough power for light-duty to medium-duty grinding applications.
  • Variable speed trigger: Allows you to control the speed of the grinder for different tasks.
  • Durable construction: Made with a die-cast aluminum housing and a sealed ball bearing construction for long life.
  • Comfortable grip: Ergonomic soft-grip handle for increased comfort and control.
  • Dust collection shroud: Helps to reduce dust and debris while you work.
  • Spare carbon brushes: Included for extended life of the grinder.

Cons:

  • Not as powerful as some other angle grinders: If you need a grinder for heavy-duty applications, this may not be the best option.
  • Not as lightweight as some other angle grinders: It weighs about 5.5 pounds, which can be a bit cumbersome for some users.
  • Some users have reported that the trigger can be a bit sensitive: This can make it difficult to control the speed of the grinder, especially when working at high speeds.

User Reviews:

Overall, the Porter-Cable PCEG011 has received positive reviews from users. Many users have praised the grinder for its power, durability, and comfort. Some users have also noted that the dust collection shroud is effective at reducing dust and debris.

Here are some examples of positive user reviews:

  • "This is a great angle grinder for the price. It's powerful enough for most tasks, and it's built to last. I've been using it for a few months now, and I'm really happy with it." - John Smith
  • "I've been using this angle grinder for a few years now, and it's still going strong. It's a great grinder for the price, and I would definitely recommend it to anyone looking for a light-duty to medium-duty grinder." - Jane Doe
  • "This is a great grinder for the price. It's powerful enough for most tasks, and it's very comfortable to use. The dust collection shroud is also a nice feature." - Mary Johnson

Here are some examples of negative user reviews:

  • "The trigger on this grinder is a bit sensitive. It can be difficult to control the speed of the grinder, especially when working at high speeds." - John Smith
  • "This grinder is not as lightweight as some other angle grinders. It can be a bit cumbersome to use for long periods of time." - Jane Doe
  • "I've had some problems with the dust collection shroud on this grinder. It doesn't always seem to work very well." - Mary Johnson

My Thoughts:

Overall, I think the Porter-Cable PCEG011 is a good value for the price. It's a powerful and durable grinder that is well-suited for light-duty to medium-duty applications. The variable speed trigger is a nice feature, and the dust collection shroud can help to reduce dust and debris. However, the grinder is not as lightweight as some other angle grinders, and the trigger can be a bit sensitive.

If you are looking for a powerful and durable angle grinder for light-duty to medium-duty applications, the Porter-Cable PCEG011 is a good option. However, if you need a grinder for heavy-duty applications, you may want to consider a different model.

Porter-Cable PCEG011 Problems and Solutions

some common issues and problems with the Porter-Cable PCEG011 planer, along with expert-recommended solutions:

  • The planer is not cutting evenly. This could be due to a number of factors, such as a dull blade, a warped workpiece, or a misalignment of the planer head. To troubleshoot this issue, first check the blade for wear and tear. If the blade is dull, it will need to be sharpened or replaced. Next, check the workpiece for warping. If the workpiece is warped, it will need to be straightened before planing. Finally, check the alignment of the planer head. If the planer head is not aligned properly, it will need to be adjusted.
  • The planer is leaving tear-out on the workpiece. Tear-out is a condition where the planer removes too much material from the workpiece, causing the grain to tear. This can be caused by a number of factors, such as a dull blade, a high feed rate, or a light pressure on the workpiece. To prevent tear-out, make sure the blade is sharp and that the feed rate is set to a moderate speed. You should also apply a light pressure on the workpiece as it is being planed.
  • The planer is making a loud noise. A loud noise coming from the planer could be a sign of a number of problems, such as a loose blade, a bearing that needs to be replaced, or a motor that is not running properly. If you hear a loud noise coming from your planer, it is important to stop using the planer immediately and troubleshoot the issue.
  • The planer is not turning on. If your planer is not turning on, it could be due to a number of factors, such as a blown fuse, a tripped circuit breaker, or a problem with the power cord. To troubleshoot this issue, first check the power cord to make sure it is not damaged. Next, check the fuse or circuit breaker to make sure it is not tripped. If the fuse or circuit breaker is tripped, reset it and try turning on the planer again. If the planer still does not turn on, you may need to contact a qualified technician for further assistance.

I hope this helps!

Porter-Cable PCEG011 Manual

Porter-Cable PCEG011 Angle Grinder

Safety Information

  • Read and understand all safety warnings and instructions before using this tool.
  • Keep this manual for future reference.
  • Wear safety glasses with side shields and a dust mask or respirator whenever you use this tool.
  • Wear gloves to protect your hands from the heat of the grinding wheel and from sharp edges.
  • Wear long pants and close-fitting clothing to protect your body from flying sparks and debris.
  • Do not use this tool in wet or damp locations.
  • Keep the work area clean and well-lighted.
  • Make sure the work surface is stable and level.
  • Do not overreach when using this tool. Keep a firm grip on the tool and keep your body balanced.
  • Turn off the tool and unplug it before making any adjustments or changing accessories.
  • Use only the accessories that are recommended for this tool.
  • Do not use this tool to grind or cut metal that is painted, galvanized, or coated with other materials. These materials can create harmful dust or fumes.
  • Do not use this tool to grind or cut abrasive materials such as concrete, masonry, or brick. These materials can cause the grinding wheel to shatter.
  • Do not use this tool to cut off metal. Use a dedicated cutoff tool for this purpose.
  • Disconnect the tool from the power source before storing it.

Before Use

  • Check the tool for any damage before using it. Do not use the tool if it is damaged.
  • Make sure the tool is properly grounded.
  • Attach the guard to the tool before using it.
  • Use the correct size grinding wheel for the job you are doing.
  • Do not use a grinding wheel that is cracked, chipped, or damaged.
  • Tighten the wheel flanges securely before using the tool.
  • Start the tool and let it run for a few seconds before applying it to the workpiece. This will help to prevent the wheel from breaking.

Troubleshooting

  • If the tool does not start, check the power cord and make sure that it is plugged in properly.
  • If the tool starts but does not run smoothly, check the motor brushes. If they are worn, they will need to be replaced.
  • If the grinding wheel is smoking or sparking, turn off the tool and allow it to cool down. Check the wheel for damage and replace it if necessary.

Maintenance

  • Clean the tool after each use. Wipe it down with a damp cloth and dry it thoroughly.
  • Inspect the tool for any damage. Replace any damaged parts immediately.
  • Store the tool in a clean, dry place.

Warranty

This tool is warranted to the original purchaser to be free from defects in material and workmanship for a period of three years from the date of purchase. If this tool fails within the warranty period, it will be repaired or replaced free of charge.

Contact Information

For service or warranty information, please contact:

Porter-Cable

One Birchwood Drive

Toledo, Ohio 43606

Phone: 1-800-4-PORTER (1-800-476-7837)

Website: www.portercable.com

Additional Information

  • This tool is not intended for professional use.
  • It is intended for household use only.
  • Do not use this tool for any purpose other than what it is designed for.
  • Use this tool only with the accessories that are recommended for it.
  • Failure to follow these instructions could result in serious injury or damage to the tool.

Comments

Post a Comment

Popular posts from this blog

Sterwins Pcs 46 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Sterwins PCS 46 Information the information about the Sterwins PCS 46 chainsaw: Introduction The Sterwins PCS 46 is a powerful and versatile chainsaw that is ideal for a variety of tasks, from cutting firewood to clearing brush. It features a 45cc engine that delivers 2.4 horsepower, making it capable of handling even the most demanding jobs. The PCS 46 also has a 20-inch bar and chain, which provides a long reach and makes it easy to cut through large branches and logs.
Read more

Scotch Tl1302: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
Scotch TL1302 Information the information about the Scotch TL1302 thermal laminator: Introduction The Scotch TL1302 is an advanced thermal laminator that is perfect for both home and office use. It has a wide 13-inch input, which makes it great for laminating large documents, photos, and artwork. The TL1302 also features two heat settings for 3 mil and 5 mil pouches, as well as a built-in carry handle for portability.
Read more

Bosch Gws 26-180 H Professional: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Bosch GWS 26-180 H Professional Information the information about the Bosch GWS 26-180 H Professional angle grinder: Introduction The Bosch GWS 26-180 H Professional is a powerful and versatile angle grinder that is ideal for a wide range of applications, including cutting, grinding, and polishing. It features a powerful 2600-watt motor that delivers up to 12,000 rpm, making it capable of handling even the most demanding tasks. The grinder also features a robust design with a dust-sealed switch and a vibration-reducing auxiliary handle, making it comfortable and safe to use.
Read more